Step 1: Hand Preparation and Plate Assessment
Thoroughly wash and disinfect your hands and those of your client. Put on protective gloves and assess the condition of their skin and nails to ensure there are no contraindications to the styling.
Step 2: Skin Development
Gently push back the cuticles with a pusher or wooden stick, and then shape them with a suitable cutter, e.g. No. 9.
Step 3: Matting the plate
Prepare the nail surface by thoroughly buffing it with a 100/180 grit buffer.
Step 4: Dust removal
Remove any dust with a soft brush to leave the tile perfectly clean.
Step 5: Degreasing
Using a dust-free cotton swab soaked in Cleaner No. 1, thoroughly degrease the nail surface.
Step 6: Primer
Apply the appropriate adhesion enhancing agent – Acid Free Primer or Acid Primer, selecting it according to the needs of the natural nail plate.
Step 7: First base coat
Apply a thin layer of your chosen hybrid base and cure it for 30 seconds in the MultiLed lamp.
Step 8: Nail structure
If the design requires it, apply a second, thicker coat of base coat to even out or slightly build up the nail. You can refine the surface with a thin Master Nail Art 007 brush or use gravity to invert the client's hand to achieve the perfect arch. Cure the product again. With a thicker coat, you can extend the curing time to 60 seconds.
Step 9: First layer of color
Apply a thin layer of Coco Flash Gel Polish, moving the brush lightly over the nail surface without pressing it into the nail plate. Cure for 30 seconds in the MultiLed lamp.
Step 10: Second coat of color
Apply another thin layer of product. If necessary, refine the cuticle line and side folds with a thin Master Nail Art brush 004 or 006, then cure again for 30 seconds.
Step 11: Securing the styling
Cover your nails with your chosen top coat, e.g. Wet Look, and cure the design for 30-60 seconds in a MultiLed lamp.
Step 12: Cooling the top
Once curing is complete, wait approximately 60 seconds for the top to cool completely and reach its full properties.