Step 1: Hygiene and preparation
Before beginning the styling process, thoroughly wash and disinfect your hands and those of your client. Put on protective gloves and check the condition of the skin and nail plate to rule out any contraindications to the treatment.
Step 2: Preparing the cuticles
Push back the cuticles with a pusher or wooden stick, and then shape them with a suitable cutter, e.g. No. 9.
Step 3: Matting the tile
Gently buff the nail surface with a 100/180 grit buffer to prepare it for product application.
Step 4: Removing the dust
Dust the plate thoroughly with a soft brush to remove all matting residue.
Step 5: Cleaning and degreasing
Wipe your nails with a lint-free cotton pad soaked in Cleaner No. 1 to remove moisture and other impurities.
Step 6: Increasing Grip
Apply the appropriate primer to the prepared nail plate – Acid Free Primer or Acid Primer – matching the preparation to the nail type.
Step 7: Base coat
Apply a thin layer of your chosen base and cure it for 30 seconds in the MultiLed lamp.
Step 8: Aligning the tile
If necessary, build up the nail with a second coat of base coat. To achieve the correct structure, you can smooth the product with the Master Nail Art 007 brush or gently turn the client's hand, using gravity to form the upper arch. Then, cure the base coat again. For a thicker coat, increase the cure time to 60 seconds.
Step 9: First layer of color
Apply a thin layer of Coco Flash Gel Polish. While applying, glide the brush gently over the nail surface, without pressing hard. Cure the product for 30 seconds in a MultiLed lamp.
Step 10: Second coat of color
Repeat the application with a second thin coat. If necessary, touch up the cuticle area and side ridges with a thin Master Nail Art brush 004 or 006, then cure again for 30 seconds.
Step 11: Finishing the look
Apply a top coat, e.g. Wet Look, to the finished styling and cure it for 30-60 seconds in a MultiLed lamp.
Step 12: Cooling the top
After removing your hand from the lamp, wait about a minute for the top to cool down and achieve its full shine and durability.