- Wash and disinfect your hands and those of your client. Put on gloves and assess the condition of their hands and nails to rule out any contraindications to the procedure.
- Push back the cuticles with a pusher or stick and work them with appropriate cutters, e.g. 9 and 1.
- Thoroughly matt the plate with a buffer.
- Remove dust with a soft brush.
- Thoroughly degrease the plate with a dust-free cotton swab and purple Cleaner.
- Apply appropriate primer: Acid Free Primer or Acid Primer.
- Apply a thin layer of Hard Base Clear and cure in the LED lamp for 30 seconds.
- Apply a thin layer of Pink No. 1 Hard Builder Bottle as a lubricant. Then, add more product, as needed, and spread it along the nail and to the sides. Use a thin brush if necessary. You can turn your hand to even out the product. For a thicker layer, increase the curing time to 60 seconds.
- If the surface requires treatment, remove the sticky layer with Cleaner Wipe Off.
- Use a file or buffer to even out the surface and the free edge.
- Remove dust and clean the surface with Purple Cleaner or Wipe Off.
- If processing isn't necessary, you can immediately apply a top coat or your chosen Gel Polish. Adjust the number of color layers to the product, curing each for 30–60 seconds in a MultiLed lamp.
- Apply your chosen top coat and cure in an LED lamp for 30–60 seconds.
- Once cured, wait at least 60 seconds. If the top coat has a sticky layer, remove it with Super Shine Cleaner or Shea Super Shine.
Pink No.1 – a builder who likes good work organization
Bottle with brush. Self-leveling consistency. Builds, builds, extends, and replenishes.
Without unnecessary complications.
You control the structure. Pink No.1 helps you build it efficiently.
Frequently asked questions about Pink No.1 Hard Builder Bottle 7 ml
Is Pink No.1 Hard Builder Bottle a builder gel?
Yes. It's a builder gel in a bottle designed for building natural and extended nails, as well as gel styling.
Can it be used to extend nails?
Yes. The product is also intended for extensions.
Is it suitable for regrowth?
Yes. You can use it when completing your styling.
Is Pink No.1 self-leveling?
Yes. Self-leveling properties make work easier and faster.
Does Hard Builder Bottle leave a sticky residue?
Yes, after curing it has a sticky layer.
Does it contain particles?
NO.
Is it soluble in remover?
Yes.
What coverage does it have?
The coverage level is 15% at a layer of 200 µm.
Polyether Urethane Methacrylate, Aliphatic Urethane Methacrylate, Acrylates Copolymer, Aliphatic Uretane Acrylate, Isobornyl Methacrylate, Epoxy Methacrylate, Silica Dimethyl Silylate, Trimethylbenzoyl Ditolylphosphine Oxide, Ethylhexyl Acrylate, PEG-3 Trimethylolpropane Triacrylate, Cellulose Acetate Butyrate, BHT , Polyester Resin +/- CI 77891, CI 74160, CI 73360, CI 77491, CI 69800, CI 74260, CI 60725
For professional use only. Avoid skin contact. Read directions for use carefully. Keep out of reach of children. In case of contact with eyes, rinse with plenty of water and seek medical advice. May cause skin and eyes irritation. Avoid exposure to dust. Can cause an allergic reaction.